android.intent.extra.text

rtorrent是一个字符界面的bt客户端，安装简便，而且速度也不错。

在ubuntu下使用下面的命令安装：

sudo apt-get install rtorrent

安装完成后我们需要作一些配置工作，配置文件是安装用户家目录下的.rtorrent.rc。这个文件默认是没有的，请到http: //libtorrent.rakshasa.no/browser/trunk/rtorrent/doc/rtorrent.rc?rev=latest 页面,将示例的配置文件内容拷贝粘贴到.rtorrent.rc中,然后我们来编辑它。

我将如下项的注释去掉，并按照自己的情况进行修改。

# Default directory to save the downloaded torrents.

directory =/home/lynn/bt

directory指定了下载文件的存放目录。

# Default session directory. Make sure you don't run multiple instance

# of rtorrent using the same session directory. Perhaps using a

# relative path?

session =/home/lynn/bt/session

session指定session的存放目录，有了它就能进行恢复下载。不然每次重启都要手动添加。

# Watch a directory for new torrents, and stop those that have been

# deleted.

schedule = watch_directory,5,5,load_start=/home/lynn/bt/watch/*.torrent

schedule = untied_directory,5,5,stop_untied=

这两项启动了rtorrent的监视功能，将种子文件放入load_start指定的目录中后，rtorrent将自动开始下载。

我的locale是zh_CN.UTF-8的因此我在配置文件中添加了下面一行，这样生成的目录和文件名就不是乱码了。

encoding_list=UTF-8

具体的操作请看man。

cat .rtorrent.rc 我的样本

# This is an example resource file for rTorrent. Copy to

# ~/.rtorrent.rc and enable/modify the options as needed. Remember to

# uncomment the options you wish to enable.

# Maximum and minimum number of peers to connect to per torrent.

#min_peers = 40

#max_peers = 100

# Same as above but for seeding completed torrents (-1 = same as downloading)

#min_peers_seed = 10

#max_peers_seed = 50

# Maximum number of simultanious uploads per torrent.

#max_uploads = 15

# Global upload and download rate in KiB. "0" for unlimited.

download_rate = 1000

upload_rate = 10

# Default directory to save the downloaded torrents.

directory = /home/huying/bt

# Default session directory. Make sure you don't run multiple instance

# of rtorrent using the same session directory. Perhaps using a

# relative path?

session = /home/huying/bt/session

# Watch a directory for new torrents, and stop those that have been

# deleted.

schedule = watch_directory,5,5,load_start=./watch/*.torrent

schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.

#schedule = low_diskspace,5,60,close_low_diskspace=100M

# Stop torrents when reaching upload ratio in percent,

# when also reaching total upload in bytes, or when

# reaching final upload ratio in percent.

# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0

#schedule = ratio,60,60,stop_on_ratio=200,200M,2000

# The ip address reported to the tracker.

#ip = 127.0.0.1

#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is

# bound to.

#bind = 127.0.0.1

#bind = rakshasa.no

# Port range to use for listening.

#port_range = 6890-6999

# Start opening ports at a random position within the port range.

#port_random = no

# Check hash for finished torrents. Might be usefull until the bug is

# fixed that causes lack of diskspace not to be properly reported.

#check_hash = no

# Set whetever the client should try to connect to UDP trackers.

#use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip's.

#schedule = ip_tick,0,1800,ip=rakshasa

#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:

# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext

#

# The example value allows incoming encrypted connections, starts unencrypted

# outgoing connections but retries with encryption if they fail, preferring

# plaintext to RC4 encryption after the encrypted handshake

#

# encryption = allow_incoming,enable_retry,prefer_plaintext

#

# Do not modify the following parameters unless you know what you're doing.

#

# Hash read-ahead controls how many MB to request the kernel to read

# ahead. If the value is too low the disk may not be fully utilized,

# while if too high the kernel might not be able to keep the read

# pages in memory thus end up trashing.

#hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.

#hash_interval = 100

# Number of attempts to check the hash while using the mincore status,

# before forcing. Overworked systems might need lower values to get a

# decent hash checking rate.

#hash_max_tries = 10

# Max number of files to keep open simultaniously.

#max_open_files = 128

# Number of sockets to simultaneously keep open.

#max_open_sockets = # Example of scheduling commands: Switch between two ip's every 5

# seconds.

#schedule = "ip_tick1,5,10,ip=torretta"

#schedule = "ip_tick2,10,10,ip=lampedusa"

# Remove a scheduled event.

#schedule_remove = "ip_tick1"

encoding_list=UTF-8

阅读(1226) | 评论(0) | 转发(0) |