刷机包开发版_平板工厂模式怎么恢复出厂设置

给coolpi4b开发板刷机的LOG
2023/6/4 23:49

IMG
I:\BaiduNetdiskDownload\[在线刷机]-RKDevTool专用镜像

I:\BaiduNetdiskDownload\[在线刷机]-RKDevTool专用镜像\Windows驱动程序\DriverAssitant_v5.12.zip

I:\BaiduNetdiskDownload\[在线刷机]-RKDevTool专用镜像\Windows刷机工具\RKDevTool_Release_v2.92.zip

https://www.cool-pi.com/topic/127/coolpi-4b-%E9%95%9C%E5%83%8F%E5%9B%BA%E4%BB%B6%E5%9C%A8%E7%BA%BF%E5%88%B7%E6%9C%BA%E6%96%B9%E6%B3%95
Coolpi 4b 镜像固件在线刷机方法

Windows主机环境
必备条件：完成上述硬件刷机环境搭建
如果电脑运行Windows7及以上环境，请使用RKDevTool工具导入img固件进行升级

操作步骤如下：
a) 安装USB驱动
Windows 刷机工具及USB驱动
在线刷机专用镜像百度网盘

https://pan.baidu.com/s/1DVmWH4uvewYDJOK7mPu10Q?pwd=mqez#list/path=%2F
https://pan.baidu.com/s/1DVmWH4uvewYDJOK7mPu10Q

H:\BaiduNetdiskDownload\[在线刷机]-RKDevTool专用镜像
总计13.3GB。

coolpi-4b-buildroot-for-rkdevtool.zip  可以通过DP输出显示。

[BEGIN] 2023/5/28 11:00:55
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:28.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: , 2, 64
SetEmmcClk: , 2, 64
mmc_set_bus_width: 8
SetEmmcClk: , 0, 3
Enable PHY CLK: , timing: 9
SdmmcInit=2 0
BootCapSize=
UserCapSize=59640MB
FwPartOffset=2000 ,
UsbBoot ...60548
powerOn 60823
SoftReset, us
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE:  BL31: Built : 16:20:07, Dec  7 2022
INFO:    spec: 0x13
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x
INFO:    SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM:  4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:
bus_width:0x16a8c8,bit_rate:
hdptx_ropll_cmn_config bus_width:16a8c8 rate:
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
285 bytes read in 3 ms (92.8 KiB/s)
1:    linux coolpi
Retrieving file: /initrd.img
reading /initrd.img
bytes read in 51 ms (164.1 MiB/s)
Retrieving file: /Image
reading /Image
bytes read in 208 ms (172.3 MiB/s)
append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:1a:59:75:85:23:4a
Retrieving file: /rk3588s-cp4.dtb
reading /rk3588s-cp4.dtb
bytes read in 5 ms (27.1 MiB/s)
## Flattened Device Tree blob at 0x0a
   Booting using the fdt blob at 0x0a
   Loading Ramdisk to eb, end eb9d45ae ... OK
   Loading Device Tree to 00000000eb, end 00000000eb175a05 ... OK
Adding bank: 0x00 - 0x0 (size: 0x0)
Adding bank: 0x0 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x (size: 0x)

Starting kernel ...

I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    5.] rk-pcie fe.pcie: IRQ msi not found
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: invalid resource
[    5.] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_iommu_probe:434: failed to get device node
[    5.] mpp_av1dec av1d-master: failed to attach iommu
[    5.] rk806 spi2.0: no sleep-setting state
[    5.] rk806 spi2.0: no reset-setting pinctrl state
[    5.] rk806 spi2.0: no dvs-setting pinctrl state
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed
[    6.] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
[    6.] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] rockchip-mipi-csi2: Async registered subdev
[    6.] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    6.] debugfs: File 'Capture' in directory 'dapm' already present!
[    6.] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    7.] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP R' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[    7.] ov5648 8-0036: could not get default pinstate
[    7.] ov5648 8-0036: could not get sleep pinstate
[    7.] ov5648 8-0036: Unexpected sensor id(000000), ret(-5)
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rockchip_headset rk-headset: Can not read property headset_gpio
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    7.] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    7.] RKNPU fdab0000.npu: failed to find power_model node
[    7.] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    7.] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
writable: clean, 4382/ files, / blocks
mount: /dev: devtmpfs already mounted or mount point busy.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
/bin/modetest
Populating /dev using udev: [    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    9.] stream_cif_mipi_id0: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    9.] rkcif_scale_ch0: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    9.] rkcif_scale_ch3: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    9.] stream_cif_mipi_id2: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    9.] rkcif_tools_id0: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    9.] rkcif_scale_ch2: update sensor info failed -19
[    9.] rkcif_tools_id2: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    9.] stream_cif_mipi_id3: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    9.] rkcif_tools_id1: update sensor info failed -19
[    9.] stream_cif_mipi_id1: update sensor info failed -19
[    9.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    9.] rkcif_scale_ch1: update sensor info failed -19
[    9.] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1160>: bus down
[   10.068529] ieee80211 phy0: 
[   10.068529] *******************************************************
[   10.068529] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[   10.068529] *******************************************************
done
Saving random seed: OK
Will now mount all partitions in /etc/fstab
strings: /dev/block/by-name/misc: No such file or directory
Note: Will skip fsck, remove /.skip_fsck to enable
Handling /dev/root / ext4 rw,noauto 1
/bin/disk-helper: line 328: findmnt: command not found
Handling tmpfs /tmp tmpfs mode=1777 0
Handling tmpfs /run tmpfs mode=0755,nosuid,nodev 0
Handling proc /proc proc defaults 0
Handling devtmpfs /dev devtmpfs defaults 0
Handling devpts /dev/pts devpts mode=0620,ptmxmode=0666,gid=5 0
Handling tmpfs /dev/shm tmpfs nosuid,nodev,noexec 0
Handling sysfs /sys sysfs defaults 0
Handling configfs /sys/kernel/config configfs defaults 0
Handling debugfs /sys/kernel/debug debugfs defaults 0
Handling pstore /sys/fs/pstore pstore defaults 0
Log saved to /tmp/mount-all.log
Starting system message bus: done
starting bootanim... Starting bootanim: 745...
done.
Starting hook: /etc/bootanim.d/gst-bootanim.sh...
wpa_supplicant.conf init
wpa_supplicant.conf init
load wifi modules: insmod: can't insert '/system/lib/modules/bcmdhd.ko': No such file or directory
OK
wl: wl driver adapter not found
Starting bluetoothd: OK
Starting network: OK
Starting seatd: OK
Starting dhcpcd...
dhcpcd-9.4.1 starting
dev: loaded udev
forked to background, child pid 799
Starting ntpd: OK
starting weston... done.
Starting dropbear sshd: OK
Starting pulseaudio: OK
Starting /usr/bin/usbdevice start, log saved to /tmp/usbdevice.log
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
[   11.] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
Date: 1970-01-01 UTC
[00:00:06.498] weston 11.0.0
               https://wayland.freedesktop.org
               Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
               Build: 11.0.0
[00:00:06.498] Command line: /usr/bin/weston
[00:00:06.498] OS: Linux, 5.10.110, #5 SMP Wed Feb 1 16:58:12 CST 2023, aarch64
[00:00:06.498] Flight recorder: enabled
[00:00:06.498] warning: XDG_RUNTIME_DIR "/var/run" is not configured
correctly.  Unix access mode must be 0700 (current mode is 0755),
and must be owned by the user UID 0 (current owner is UID 0).
Refer to your distribution on how to get it, or
http://www.freedesktop.org/wiki/Specifications/basedir-spec
on how to implement it.
[00:00:06.498] Using config file '/etc/xdg/weston/weston.ini'
[00:00:06.498] Output repaint window is -1 ms maximum.
[00:00:06.499] Loading module '/usr/lib/libweston-11/drm-backend.so'
[00:00:06.502] initializing drm backend
[00:00:06.502] Entering mirror mode.
[00:00:06.502] Trying libseat launcher...
[00:00:06.502] [libseat/libseat.c:73] Seat opened with backend 'seatd'
[00:00:06.502] [libseat/backend/seatd.c:228] Enabling seat
[00:00:06.502] libseat: session control granted
[00:00:06.503] using /dev/dri/card0
[00:00:06.503] DRM: does not support atomic modesetting
[00:00:06.503] DRM: does not support GBM modifiers
[00:00:06.503] DRM: supports picture aspect ratio
[00:00:06.503] Loading module '/usr/lib/libweston-11/gl-renderer.so'
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '6'.
[00:00:06.521] EGL version: 1.4 Valhall-"g6p0-01eac0"
[00:00:06.521] EGL vendor: ARM
[00:00:06.521] EGL client APIs: OpenGL_ES
[00:00:06.521] warning: Disabling render GPU timeline and explicit synchronization due to missing EGL_ANDROID_native_fence_sync extension
[00:00:06.521] EGL features:
               EGL Wayland extension: yes
               context priority: yes
               buffer age: no
               partial update: yes
               swap buffers with damage: no
               configless context: yes
               surfaceless context: yes
               dmabuf support: modifiers
[00:00:06.535] GL version: OpenGL ES 3.2 v1.g6p0-01eac0.ba52c908db8f5fe28f383a2b03
[00:00:06.535] GLSL version: OpenGL ES GLSL ES 3.20
[00:00:06.535] GL vendor: ARM
[00:00:06.535] GL renderer: Mali-LODX
Starting dnsmasq: OK
Starting input-event-daemon: done
[00:00:06.656] GL ES 3.2 - renderer features:
               read-back format: ARGB8888
               wl_shm 10 bpc formats: yes
               wl_shm 16 bpc formats: no
               wl_shm half-float formats: yes
               internal R and RG formats: yes
               OES_EGL_image_external: yes
               wl_shm sub-image to texture: yes
[00:00:06.665] event4  - adc-keys: is tagged by udev as: Keyboard
[00:00:06.665] event4  - adc-keys: device is a keyboard
[00:00:06.665] event2  - rockchip,dp0 rockchip,dp0: is tagged by udev as: Switch
[00:00:06.690] event2  - not using input device '/dev/input/event2'
[00:00:06.690] event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[00:00:06.690] event1  - Logitech USB Optical Mouse: device set to 1000 DPI
[00:00:06.690] event1  - Logitech USB Optical Mouse: device is a pointer
[00:00:06.691] event0  - rk805 pwrkey: is tagged by udev as: Keyboard
[00:00:06.691] event0  - rk805 pwrkey: device is a keyboard
[00:00:06.691] event3  - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch
[00:00:06.713] event3  - not using input device '/dev/input/event3'
[00:00:06.729] libinput: configuring device "adc-keys".
[00:00:06.729] libinput: configuring device "Logitech USB Optical Mouse".
[00:00:06.729] libinput: configuring device "rk805 pwrkey".
root@rk3588:/# [00:00:06.853] DRM: head 'HDMI-A-1' updated, connector 197 is connected, EDID make 'KIG', model 'K22Y', serial '000000000'
               Supported EOTF modes: SDR
[00:00:06.853] DRM: head 'HDMI-A-1' found, connector 197 is connected, EDID make 'KIG', model 'K22Y', serial '000000000'
               Supported EOTF modes: SDR
[00:00:06.853] DRM: head 'DP-1' updated, connector 211 is disconnected.
[00:00:06.853] DRM: head 'DP-1' found, connector 211 is disconnected.
[00:00:06.853] Registered plugin API 'weston_drm_output_api_v1' of size 32
[00:00:06.853] Color manager: no-op
[00:00:06.853] Output 'HDMI-A-1' attempts EOTF mode: SDR
[00:00:06.853] Output 'HDMI-A-1' using color profile: built-in default sRGB SDR profile
[00:00:06.853] Chosen EGL config details: id:   9 rgba: 8 8 8 0 buf: 24 dep:  0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x)
[00:00:06.853] Initialized backlight for head 'HDMI-A-1', device /sys/class/backlight/backlight
[00:00:06.853] Output HDMI-A-1 (crtc 82) video modes:
               1920x1080@60.0, preferred, current, 148.5 MHz
               1920x1080@75.0, 174.5 MHz
               1920x1080@59.9 16:9, 148.4 MHz
               1920x1080@50.0 16:9, 148.5 MHz
               1680x1050@59.9, 119.0 MHz
               1600x900@60.0, 108.0 MHz
               1280x1024@75.0, 135.0 MHz
               1280x1024@60.0, 108.0 MHz
               1440x900@59.9, 88.8 MHz
               1366x768@59.8, 85.5 MHz
               1152x864@75.0, 108.0 MHz
               1280x720@60.0, 74.2 MHz
               1280x720@60.0 16:9, 74.2 MHz
               1280x720@59.9 16:9, 74.2 MHz
               1280x720@50.0 16:9, 74.2 MHz
               1024x768@75.0, 78.8 MHz
               1024x768@70.1, 75.0 MHz
               1024x768@60.0, 65.0 MHz
               832x624@74.6, 57.3 MHz
               800x600@75.0, 49.5 MHz
               800x600@72.2, 50.0 MHz
               800x600@60.3, 40.0 MHz
               800x600@56.2, 36.0 MHz
               720x576@50.0 16:9, 27.0 MHz
               720x480@60.0 16:9, 27.0 MHz
               720x480@59.9 16:9, 27.0 MHz
               640x480@75.0, 31.5 MHz
               640x480@72.8, 31.5 MHz
               640x480@66.7, 30.2 MHz
               640x480@60.0 4:3, 25.2 MHz
               640x480@59.9, 25.2 MHz
               720x400@70.1, 28.3 MHz
[00:00:06.853] associating input device event4 with output HDMI-A-1 (none by udev)
[00:00:06.853] associating input device event1 with output HDMI-A-1 (none by udev)
[00:00:06.853] associating input device event0 with output HDMI-A-1 (none by udev)
[00:00:06.853] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
[00:00:06.853] Compositor capabilities:
               arbitrary surface rotation: yes
               screen capture uses y-flip: yes
               cursor planes: yes
               arbitrary resolutions: no
               view mask clipping: yes
               explicit sync: no
               color operations: yes
               presentation clock: CLOCK_MONOTONIC, id 1
               presentation clock resolution: 0.000000001 s
[00:00:06.866] Loading module '/usr/lib/weston/desktop-shell.so'
[00:00:06.867] launching '/usr/libexec/weston-keyboard'
[00:00:06.867] launching '/usr/libexec/weston-desktop-shell'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
W: [pulseaudio] authkey.c: Failed to open cookie file '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to open cookie file '//.pulse-cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '//.pulse-cookie': No such file or directory
E: [pulseaudio] module-rescue-streams.c: module-rescue-stream is obsolete and should no longer be loaded. Please remove it from your configuration.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
[00:00:10.840] Detected a monitor change on head 'HDMI-A-1', not bothering to do anything about it.

[END] 2023/5/28 11:04:35
 

coolpi-4b-ubuntu20.04.zip  可以通过DP输出显示。
coolpi-4b-ubuntu22-.zip  可以通过DP输出显示。

[BEGIN] 2023/5/28 11:16:09
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: , 2, 64
SetEmmcClk: , 2, 64
mmc_set_bus_width: 8
SetEmmcClk: , 0, 3
Enable PHY CLK: , timing: 9
SdmmcInit=2 0
BootCapSize=
UserCapSize=59640MB
FwPartOffset=2000 ,
UsbBoot ...60549
powerOn 60822
SoftReset, us
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE:  BL31: Built : 16:20:07, Dec  7 2022
INFO:    spec: 0x13
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x
INFO:    SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM:  4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:
bus_width:0x16a8c8,bit_rate:
hdptx_ropll_cmn_config bus_width:16a8c8 rate:
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
285 bytes read in 3 ms (92.8 KiB/s)
1:    linux coolpi
Retrieving file: /initrd.img
reading /initrd.img
bytes read in 51 ms (164.1 MiB/s)
Retrieving file: /Image
reading /Image
bytes read in 208 ms (172.3 MiB/s)
append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:1a:59:75:85:23:4a
Retrieving file: /rk3588s-cp4.dtb
reading /rk3588s-cp4.dtb
bytes read in 5 ms (27.1 MiB/s)
## Flattened Device Tree blob at 0x0a
   Booting using the fdt blob at 0x0a
   Loading Ramdisk to eb, end eb9d45ae ... OK
   Loading Device Tree to 00000000eb, end 00000000eb175a05 ... OK
Adding bank: 0x00 - 0x0 (size: 0x0)
Adding bank: 0x0 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x (size: 0x)

Starting kernel ...

I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    5.] rk-pcie fe.pcie: IRQ msi not found
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: invalid resource
[    5.] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_iommu_probe:434: failed to get device node
[    5.] mpp_av1dec av1d-master: failed to attach iommu
[    5.] rk806 spi2.0: no sleep-setting state
[    5.] rk806 spi2.0: no reset-setting pinctrl state
[    5.] rk806 spi2.0: no dvs-setting pinctrl state
[    6.085044] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.092399] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.099748] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed
[    6.] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
[    6.] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] rockchip-mipi-csi2: Async registered subdev
[    6.] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    6.] debugfs: File 'Capture' in directory 'dapm' already present!
[    6.] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    7.] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP R' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[    7.] ov5648 8-0036: could not get default pinstate
[    7.] ov5648 8-0036: could not get sleep pinstate
[    7.] ov5648 8-0036: Unexpected sensor id(000000), ret(-5)
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] rockchip_headset rk-headset: Can not read property headset_gpio
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    7.] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] RKNPU fdab0000.npu: failed to find power_model node
[    7.] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    7.] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
writable: clean, / files, / blocks
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.] rkcif_scale_ch3: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif_tools_id0: update sensor info failed -19
[    8.] stream_cif_mipi_id2: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] rkcif_tools_id2: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] stream_cif_mipi_id1: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] rkcif_tools_id1: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif_scale_ch0: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] rkcif_scale_ch1: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.] stream_cif_mipi_id3: update sensor info failed -19
[    8.] rkcif_scale_ch2: update sensor info failed -19
[    8.] stream_cif_mipi_id0: update sensor info failed -19
[    8.] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1160>: bus down
[    9.] ieee80211 phy0: 
[    9.] *******************************************************
[    9.] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[    9.] *******************************************************
[   17.] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id1: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] rkcif_tools_id2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_scale_ch0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_scale_ch1: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] rkcif_scale_ch2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.] rkcif_scale_ch3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_tools_id0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_tools_id1: update sensor info failed -19
[   18.] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id1: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] rkcif_tools_id2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.] stream_cif_mipi_id3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_scale_ch0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_scale_ch1: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] rkcif_scale_ch2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.] rkcif_scale_ch3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_tools_id0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_tools_id1: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   19.] stream_cif_mipi_id0: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   19.] stream_cif_mipi_id1: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   19.] rkcif_tools_id2: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   19.] stream_cif_mipi_id2: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   19.] stream_cif_mipi_id3: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   19.] rkcif_scale_ch0: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   19.] rkcif_scale_ch1: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   19.] rkcif_scale_ch2: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   19.] rkcif_scale_ch3: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   19.] rkcif_tools_id0: update sensor info failed -19
[   19.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   19.] rkcif_tools_id1: update sensor info failed -19

Ubuntu 22.04.1 LTS coolpi ttyS0

coolpi login: DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:24.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE:  BL31: Built : 16:20:07, Dec  7 2022
INFO:    spec: 0x13
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x
INFO:    SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM:  4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:
bus_width:0x16a8c8,bit_rate:
hdptx_ropll_cmn_config bus_width:16a8c8 rate:
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
285 bytes read in 3 ms (92.8 KiB/s)
1:    linux coolpi
Retrieving file: /initrd.img
reading /initrd.img
bytes read in 51 ms (164.1 MiB/s)
Retrieving file: /Image
reading /Image
bytes read in 208 ms (172.3 MiB/s)
append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:1a:59:75:85:23:4a
Retrieving file: /rk3588s-cp4.dtb
reading /rk3588s-cp4.dtb
bytes read in 5 ms (27.1 MiB/s)
## Flattened Device Tree blob at 0x0a
   Booting using the fdt blob at 0x0a
   Loading Ramdisk to eb, end eb9d45ae ... OK
   Loading Device Tree to 00000000eb, end 00000000eb175a05 ... OK
Adding bank: 0x00 - 0x0 (size: 0x0)
Adding bank: 0x0 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x (size: 0x)

Starting kernel ...

I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    5.] rk-pcie fe.pcie: IRQ msi not found
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: Missing *config* reg space
[    5.] rk-pcie fe.pcie: invalid resource
[    5.] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    5.] rkvdec2_init:1010: No niu aclk reset resource define
[    5.] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    5.] rkvdec2_init:1013: No niu hclk reset resource define
[    5.] mpp_iommu_probe:434: failed to get device node
[    5.] mpp_av1dec av1d-master: failed to attach iommu
[    5.] rk806 spi2.0: no sleep-setting state
[    5.] rk806 spi2.0: no reset-setting pinctrl state
[    5.] rk806 spi2.0: no dvs-setting pinctrl state
[    6.086140] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.093497] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
[    6.] tinker-mcu: send_cmds: send command failed
[    6.] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
[    6.] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : terminal subdev does not exist
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] : get_remote_sensor: video pad[0] is null
[    6.] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    6.] rockchip-mipi-csi2: Async registered subdev
[    6.] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    6.] debugfs: File 'Capture' in directory 'dapm' already present!
[    6.] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    7.] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPCP R' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[    7.] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[    7.] ov5648 8-0036: could not get default pinstate
[    7.] ov5648 8-0036: could not get sleep pinstate
[    7.] ov5648 8-0036: Unexpected sensor id(000000), ret(-5)
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    7.] rockchip_headset rk-headset: Can not read property headset_gpio
[    7.] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    7.] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    7.] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    7.] RKNPU fdab0000.npu: failed to find power_model node
[    7.] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    7.] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
writable: recovering journal
writable: clean, / files, / blocks
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif_scale_ch0: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] rkcif_scale_ch1: update sensor info failed -19
[    8.] stream_cif_mipi_id0: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] stream_cif_mipi_id1: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] rkcif_tools_id2: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[    8.] rkcif_scale_ch3: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[    8.] rkcif_tools_id0: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[    8.] rkcif_tools_id1: update sensor info failed -19
[    8.] stream_cif_mipi_id3: update sensor info failed -19
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[    8.] stream_cif_mipi_id2: update sensor info failed -19
[    8.] rkcif_scale_ch2: update sensor info failed -19
[    9.] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1160>: bus down
[    9.] ieee80211 phy0: 
[    9.] *******************************************************
[    9.] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[    9.] *******************************************************
[   16.] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   17.] stream_cif_mipi_id0: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   17.] stream_cif_mipi_id1: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   17.] rkcif_tools_id2: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   17.] stream_cif_mipi_id2: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   17.] stream_cif_mipi_id3: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   17.] rkcif_scale_ch0: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   17.] rkcif_scale_ch1: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   17.] rkcif_scale_ch2: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   17.] rkcif_scale_ch3: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   17.] rkcif_tools_id0: update sensor info failed -19
[   17.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   17.] rkcif_tools_id1: update sensor info failed -19
[   17.] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2)
[   18.026450] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.035589] stream_cif_mipi_id0: update sensor info failed -19
[   18.041512] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.050640] stream_cif_mipi_id1: update sensor info failed -19
[   18.056541] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.065666] rkcif_tools_id2: update sensor info failed -19
[   18.071210] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.080329] stream_cif_mipi_id2: update sensor info failed -19
[   18.086226] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.095352] stream_cif_mipi_id3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_scale_ch0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_scale_ch1: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
[   18.] rkcif_scale_ch2: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
[   18.] rkcif_scale_ch3: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
[   18.] rkcif_tools_id0: update sensor info failed -19
[   18.] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
[   18.] rkcif_tools_id1: update sensor info failed -19

Ubuntu 22.04.1 LTS coolpi ttyS0

[END] 2023/5/28 11:25:41
 

里面的coolpi-4b-android12-.zip不能通过DP输出显示。coolpi-4b-android12-.img【2GB出头的大小】

[BEGIN] 2023/5/28 11:26:04
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:29.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:22.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Nov 22 2022 14:37:46, version: 1.10
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: , 2, 64
SetEmmcClk: , 2, 64
mmc_set_bus_width: 8
SetEmmcClk: , 0, 3
Enable PHY CLK: , timing: 9
SdmmcInit=2 0
BootCapSize=
UserCapSize=59640MB
FwPartOffset=2000 ,
UsbBoot ...60543
powerOn 60814
SoftReset, us
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:30.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:22.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE:  BL31: Built : 16:20:07, Dec  7 2022
INFO:    spec: 0x13
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x
INFO:    SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM:  4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:
bus_width:0x16a8c8,bit_rate:
hdptx_ropll_cmn_config bus_width:16a8c8 rate:
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Loading order: usb - tf - emmc
bank id invalid
request for 141 failed:-22
bank id invalid
request for 141 failed:-22
resetting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
switch to partitions #0, OK
mmc0(part 0) is current device
reading cmdline.txt
switch to partitions #0, OK
mmc0(part 0) is current device
reading config.txt
reading /vmlinuz
bytes read in 97 ms (167.4 MiB/s)
reading /initrd.img
bytes read in 60 ms (163.6 MiB/s)
reading /rk3588s-cp4.dtb
bytes read in 5 ms (42.9 MiB/s)
Uncompressed size: = 0x23AB808
## Flattened Device Tree blob at 0x0a
   Booting using the fdt blob at 0x0a
  'reserved-memory' ramoops@: addr= size=e0000
   Loading Ramdisk to eb006000, end eb9d6597 ... OK
   Loading Device Tree to 00000000eafcc000, end 00000000eb005f44 ... OK
Adding bank: 0x00 - 0x0 (size: 0x0)
Adding bank: 0x0 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x (size: 0x)

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
DDR V1.09 ae06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x6
CH0 RX Vref:29.7%, TX Vref:23.8%,0.0%
CH1 RX Vref:28.7%, TX Vref:23.8%,0.0%
CH2 RX Vref:30.7%, TX Vref:22.8%,0.0%
CH3 RX Vref:28.7%, TX Vref:23.8%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
NOTICE:  BL31: Built : 16:20:07, Dec  7 2022
INFO:    spec: 0x13
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x
INFO:    SPSR = 0x3c9

COOLPI LOADER BY YANYI(Jan 04 2023)

DRAM:  4 GiB
Using default environment

0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
Monitor has basic audio support
hdmi info isn't saved in main block
mode:1920x1080 bus_format:0x100a
hdmi@fde80000:  detailed mode clock kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
VOP update mode to: 1920x1080p0, type: HDMI0 for VP0
dclk:,if_pixclk_div;2,if_dclk_div:4
rockchip_vop2_init: hdmi0_phy_pll may not define
rockchip_vop2_init: hdmi1_phy_pll may not define
assigned-clock-parents's node not define
VP0 set crtc_clock to KHz
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
CEA mode used vic=16
mtmdsclock:
bus_width:0x16a8c8,bit_rate:
hdptx_ropll_cmn_config bus_width:16a8c8 rate:
hdptx phy pll locked!
hdptx phy lane locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
Autoboot in 1 seconds
trsv ln0 mon rx cdr lock timeout
dp@fde50000 disconnected
VOP VP0 enable Esmart0[356x124->356x124@782x478] fmt[1] addr[0xedf21000]
starting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 2
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Loading order: usb - tf - emmc
bank id invalid
request for 141 failed:-22
bank id invalid
request for 141 failed:-22
resetting USB...
Bus usb@fc: USB EHCI 1.00
scanning bus usb@fc for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
MMC: no card present
mmc_init: -123, time 2
** Bad device mmc 1 **
switch to partitions #0, OK
mmc0(part 0) is current device
reading cmdline.txt
switch to partitions #0, OK
mmc0(part 0) is current device
reading config.txt
reading /vmlinuz
bytes read in 96 ms (169.2 MiB/s)
reading /initrd.img
bytes read in 12 ms (107.4 MiB/s)
reading /rk3588s-cp4.dtb
bytes read in 5 ms (42.9 MiB/s)
Uncompressed size: = 0x23AB808
## Flattened Device Tree blob at 0x0a
   Booting using the fdt blob at 0x0a
  'reserved-memory' ramoops@: addr= size=e0000
   Loading Ramdisk to eb88c000, end eb9d5e0b ... OK
   Loading Device Tree to 00000000eb, end 00000000eb88bf44 ... OK
Adding bank: 0x00 - 0x0 (size: 0x0)
Adding bank: 0x0 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x (size: 0x)

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot

拒绝访问。

Connection closed.

Disconnected from remote host(UART3) at 11:46:21.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 

Connecting to COM3...
Connected.

[END] 2023/5/28 11:46:51